|
|
| |
|
|
| |
| C-Cure (grouts and adhesives) |
FloorMix 900
A factory blend of Portland cement, fine sand and special chemical additives
which produce an excellent dry-set mortar for floor tile installations of low
absorption tiles (less than 7%).
Applicable ANSI Standards: A108.5, A108.1B, A118.1
-Available in white and gray-
Pro M-Bond Ultra™ 918
Use as a professional grade bond coat for setting high lug, absorptive,
semi-vitreous, vitreous ceramic tiles and natural stone for service in residential
and commercial use. It is used in a mortar bed from 3/32" to 3/16" (2.4 to
4.8 mm) after the tiles have been properly embedded.
Pro M-Flex Strata™ 914
A flexible, latex- Portland cement mortar that is composed of an integral blend
of special diverse dry polymers, plasticizers, Portland cement and sand. When
cured, each separate polymer imparts distinct characteristics which compliment
the other polymers forming a union which provides for 48% higher flexural
strength than conventional mortars, thus furnishing the ultimate in a single
component latex-Portland cement mortar.
This product is covered by a 5 Year Warranty -Available in white and gray-
Pro M-Flex Strata® FastSet 914-FS
A flexible, fast-setting, polymer-modified mortar that is composed of an integral
blend of special dry polymers and plasticizers for flexibility, special chemical
additives for fast-setting properties, Portland cement and sand. Pro M-Flex Strata®
FastSet 914-FS allows the contractor to grout within two hours of setting tile so the
finished installation can be open to foot traffic in 4 - 6 hours.
This product is covered by a 5 Year Warranty
Pro Full Contact 907
Specifically formulated to provide a single-step installation method for large
format ceramic tile and stone. It fully supports heavy tiles and stone, reducing
lippage problems and the need for leveling or pre-floating rough surfaces. Pro
Full Contact 907 can be built up to 3/4" (19 mm) without shrinkage or extended
set times.
This product is covered by a 5 Year Warranty
QuickCure 908
A polymer-modified dry-set mortar designed to be used as a fast setting
bond coat for the installation of all types of tile over a variety of substrates.
This product is covered by a 5 Year Warranty
CurePerfect 930
The CurePerfect 930 Grout System marks the latest step in the evolution
of grouting systems for ceramic tile, marble and stone surfaces.
This product is covered by a 5 Year Warranty and a 10 Year Warranty.
AR Sanded Grout 922
A blend of Portland cement, specially graded silica sand and colorfast
pigments that form a dense matrix, free of any voids. In addition, special
chemicals have been added to provide for a superior grout that offers ease
of workability and clean-up, rapid cure, high compressive strength, low
shrinkage, good bond strength and color control. AR 922 is highly resistant
to bacteria, fungus, oils and alkalies. It is non-toxic, non-dusting and does
not contain iron.
This product is covered by a 5 Year Warranty
CureLastic 949®
A ready-mixed, organic, trowel applied anti-fracture membrane and adhesive
developed to install ceramic tile and stone over a variety of substrates.
LevelCure SLU 961
The state-of-the-art in Portland cement technology. With the sole addition of
water, it becomes a free flowing liquid mortar that seeks its own level and
produces a smooth flat surface. LevelCure SLU 961 has been designed as an
underlayment for the fast leveling and smoothing of floor surfaces with a
minimum of labor required. The resulting finish is a smooth and durable
surface that is acceptable for the installation of all floor coverings.
This product is covered by a 5 Year Warranty
Pro-Red Waterproofing Membrane 963
A ready-to-use, elastomeric, waterproofing and anti-fracture membrane for
all interior or exterior commercial and residential tile and stone installations.
Easily applied with roller, trowel or sprayer producing a continuous moisture
barrier with outstanding adhesion. Reduces crack transmission in ceramic tile
or stone floors.
This product is covered by a 5 Year Warranty and a 10 Year Warranty.
LevelCure LCB 951
The state-of-the-art in Portland cement technology. With the sole addition of
water, it becomes a free flowing liquid mortar that seeks its own level and produces
a smooth flat surface. LevelCure LCB 951 has been designed as an underlayment
for the fast leveling and smoothing of floor surfaces with a minimum of labor
required. The resulting finish is a smooth and durable surface that is acceptable
for the installation of all floor coverings.
PRO M-Lite 929 Tile & Stone Mortar NEW!
Offers high flexibility and bond strength for a wide variety of floor and wall
tile installations.Excellent for setting large format tile or stone, PRO M-LITE 929
will not sag or slip on walls and offers non-slump performance for floor installations.
PRO M-LITE 929 is 40% lighter than traditional mortars, providing excellent handling
characteristics. A 30 lb. (13.6 kg) bag covers the same area as a 50 lb. (22.7 kg) bag
of traditional mortar. Formulated with recycled material – contributes to LEED certification.
This product is covered by a 10 Year Warranty
PermaBond 1002 Ultra Mastic
A superior strength adhesive composed of the highest quality organic resins and
latexes. It has been formulated to perform equally well for both wall and floor tile
installations.
This product is covered by a 5 Year Warranty and a 10 Year Warranty
ProFinish 989
A non-sanded, Portland cement compound for the skim coating and finishing of
interior or exterior subfloors prior to the installation of resilient flooring such as
vinyl and VCT, carpet, ceramic tile, slate, granite or marble.
This product is covered by a 5 Year Warranty
|
|
|
 |
|
 |
|
